抗紫外线UVPC 德国科思创（拜耳） 2207 高流动级 低粘度

抗紫外线UVPC 德国科思创（拜耳） 2207 高流动级 低粘度

抗紫外线UVPC 德国科思创（拜耳） 2207 高流动级 低粘度低粘度

2205MI=36 ; 普通用途; 易脱模; 注塑成型; 只提供透明颜色2207MI=36 ; 普通用途; 紫外线稳定; 易脱模;注塑成型; 只提供透明颜色2405MI=19 ; 普通用途; 易脱模; 注塑成型; 可提供透明, 半透明和不透明颜色2407MI=19; 普通用途; 紫外线稳定; 易脱模; 注塑成型; 可提供透明, 半透明和不透明颜色中粘度

2605MI=12.5 ; 普通用途; 易脱模; 注塑成型; 可提供透明, 半透明和不透明颜色2607MI=12.5 ; 普通用途;紫外线稳定; 易脱模; 注塑成型; 可提供透明, 半透明和不透明颜色2805MI=9.5 ; 普通用途; 易脱模; 注塑成型;可提供透明, 半透明和不透明颜色2807MI=9.5 ; 普通用途; 紫外线稳定; 易脱模; 注塑成型; 可提供透明,半透明和不透明颜色高粘度3105MI=6.0 ; 普通用途; 易脱模; 注塑成型; 可提供透明, 半透明和不透明颜色


低粘度2456MI=19 ; 普通用途; 良好的耐水解性; 注塑成型; 可提供透明, 半透明和不透明颜色中粘度

2856MI=12.5 ; 普通用途; 良好的耐水解性; 注塑成型; 可提供透明, 半透明和不透明颜色1248MI=7.0 ;冲击改性; 注塑成型; 只提供淡颜色高粘度

3106MI=6.0 ; 良好的耐水解性; 注塑成型和挤出成型; 可提供透明, 半透明和不透明颜色3206MI=4.0 ;良好的耐水解性;注塑成型和挤出成型; 可提供透明, 半透明和不透明颜色


低粘度

6165XMI=28 ; 阻燃; UL 94V-0/1.2毫米; 低粘度; 易脱模; 注塑成型 – 熔体温度 280 - 320°C;只提供不透明颜色; 可用于平板电视机框架6265XMI=19 ; UL 94 V-0/1.5毫米; 易脱模; 注塑成型;只提供不透明颜色6267XMI=19 ; UL 94 V-0/1.5毫米; 紫外线稳定; 易脱模; 注塑成型;只提供不透明颜色6255MI=19 ; 阻燃体系不含氯和溴;UL 94V-0/3.0毫米; 低粘度; 易脱模; 注塑成型 – 熔体温度280 - 320°C; 可提供半透明和不透明颜色中粘度

2665MI=12.5 ; UL 94 V-2/1.5毫米和3.0毫米; 易脱模; 注塑成型; 可提供透明,半透明和不透明颜色2667MI=12.5 ; UL 94 V-2/1.5毫米和3.0毫米; 紫外线稳定; 易脱模; 注塑成型;可提供透明,半透明和不透明颜色2865MI=9.5 ; UL 94 V-2/1.5毫米和3.0毫米; 易脱模; 注塑成型;可提供透明, 半透明和不透明颜色2867MI=9.5 ; UL 94 V-2/1.5毫米和3.0毫米; 紫外线稳定; 易脱模;注塑成型; 可提供透明,半透明和不透明颜色1889以前的 Makrolon DP1-1899; MI=15.5 ; 特殊的阻燃体系;UL 94V-0/0.75毫米; 冲击改性;中粘度; 易脱模; 维卡软化温度 （50N; 50 °C/h） = 110 °C;注塑成型 – 熔体温度 240 - 280 °C;只提供不透明颜色; 可用于电池外壳1952以前的 MakrolonDP1-1952; MI=9.5 ; 阻燃体系不含氯和溴; UL 94V-0/2.3毫米; 中粘度;紫外线稳定; 易脱模; 注塑成型– 熔体温度 280 - 320 °C; 可提供半透明和不透明颜色;可用于笔记本电脑的液晶显示器外壳6555MI=9.5 ; UL94 V-0/3.0毫米; 易脱模; 注塑成型; 可提供透明, 半透明和不透明颜色6557MI=9.5 ; UL 94V-0/3.0毫米; 紫外线稳定; 易脱模; 注塑成型; 可提供透明, 半透明和不透明颜色6485MI=10.5 ; UL 94V-0/1.5和5VA/3.0毫米; 易脱模; 注塑成型; 只提供不透明颜色6487MI=12.5 ; UL 94V-0/1.5和5VA/3.0毫米; 紫外线稳定; 易脱模; 注塑成型; 只提供不透明颜色高粘度

1804MI=6.0 ; 高粘度; 紫外线稳定; 为加工时低的阻燃剂析出而优化的配方; 改进的阻燃性; UL94V-2/1.5毫米和3.0毫米; 注塑成型和挤出成型; 可提供透明, 半透明和不透明颜色;可用于异型材挤出6717以前的开发中产品 Makrolon® DP1-1853; MI=3.0 ; UL 94 V-0/2.0毫米;紫外线稳定; 易脱模;注塑成型和挤出成型; 只提供透明颜色


低粘度1260MI=34 ; 易脱模; 注塑成型; 只提供淡颜色中粘度

1837以前的 Makrolon DP1-1837; MI=11 ; 冲击改性; 中粘度; 易脱模; 注塑成型 – 熔体温度 280-320 °C; 只提供不透明颜色1248亚太区及欧洲中东地区品级; 以前的开发中产品Makrolon® KU1-1248;MI=7.0 ; 冲击改性; 食品接触品质;注塑成型; 只提供淡颜色

聚碳酸酯的性能以及成型参数：  一、原料的干燥

1、原料烘干：普通烘干箱温度110—130，时间2—4小时，机顶料斗烘干箱温度100—120，要求水分含量低于0.03。

2、判断水含量是否合格：看空注射的料条情况，物料通过塑化后由喷嘴流出来的料条应是均匀无色、无银丝和无气泡的细条；否则则是烘干不彻底。

二、注射工艺

1、注塑机调整成型参数（视原料分子量高低调整）：

料筒温度：前部250—310，中部240—280，后部230—250。

喷嘴温度：比后部低10。

模具温度：70—120。

注射压力：70—140MPa。

螺杆转速：30—120r/min。

成型周期：注射1—25s，冷却5—40s。

PC is the abbreviation ofpolycarbonate, also known as PC engineering plastic. PC material isactually one of the engineering plastics we refer to. As a widelyused material worldwide, PC has its own characteristics andadvantages and disadvantages. PC is an amorphous thermoplasticresin with excellent comprehensive performance, which has excellentelectrical insulation, elongation, dimensional stability, andchemical corrosion resistance, and high strength गर्मी चिद्रायणंविरोध्यता; It also has the advantages of self-extinguishing, flameretardant, non-toxic, and colorable. You can see the shadow of PCplastic in every corner of your life, and its large-scaleindustrial production and easy processing characteristics also makeits price extremely low.

स्वतोजङ्गमपृथुवादी निर्मातांउत्पादनम्

Polycarbonate has excellentimpact and thermal distortion resistance, as well as good weatherresistance and high hardness. Therefore, it is suitable forproducing various components of cars and light trucks, mainlyconcentrated in lighting systems, instrument panels, heatingplates, defrosters, and polycarbonate alloy safety bars.

वैद्यानिक उपकरणम्

ध्यानःसावधानम् steam, cleaningagents, heating, and high-dose radiation disinfection withoutyellowing or physical performance degradation, polycarbonateproducts are widely used in artificial kidney hemodialysisequipment and other medical devices that require transparent andintuitive operation and repeated disinfection. उदाहरणम्, producinghigh-pressure syringes, surgical masks, disposable dentalequipment, blood separators, etc.

Aerospace

विद्युत्तमाविमानसा-विद्योपक्षस्य सम्पादकेन्द्रियां चौडायां चौडायां चौडायां 9विमानसायां या विश्वासप्रयोगं निर्धारणम According to statistics,there are 2500 polycarbonate components used on a single Boeingaircraft, and a single aircraft consumes approximately 2 tons ofpolycarbonate. On the spacecraft, hundreds of polycarbonatecomponents with different configurations and reinforced with glassfibers, as well as protective equipment for astronauts, wereused.

साकरणक्षेत्रम्

नवो विकस्तां पुरणक्षेत्रस्थानंसंयुक्तस्थानं भिन्नानि जलस्थानबाटलस्थानं शक्यतेपुनराप्रतिष्ठापकाशां च Due to the advantages of lightweight, impactresistance, and transparency of polycarbonate products, which donot deform and remain transparent when washed with hot water andcorrosive solutions, PC bottles have completely replaced glassbottles in some fields.

Electronics industry

Due to its excellent andconstant electrical insulation properties over a wide range oftemperature and humidity, polycarbonate is an excellent insulationmaterial. सद्यः

Optical lens

Polycarbonate plays anextremely important role in this field due to its uniquecharacteristics of high transmittance, high refractive index, highimpact resistance, dimensional stability, and easy processing andmolding. Optical lens made with optical grade polycarbonate can notonly be used in cameras, microscopes, telescopes, and opticaltesting instruments, but also in film projector lens, copier lens,infrared autofocus projector lens, shock beam printer lens, as wellas various prism mirrors, multi-sided reflectors, and many otheroffice equipment and home appliances. Their application market isextremely broad.