Zytel PA66:
101: General purpose polyamide66 resin for injection molding andextrusion(通用聚酰胺66树脂注塑成型和挤出)
101F: Internally lubricatedpolyamide 66 resin for injection molding. It was developed for fastcycles and high productivity.(含有润滑聚酰胺66树脂注塑。它是为快速周期和***)
101L: Lubricated polyamide 66resin for injection molding（润滑聚酰胺66树脂注塑成型）
103FHS: Heat stabilized,internally lubricated polyamide 66 resin for injection molding. Itwas developed for fast cycles and highproductivity.（热稳定，国内聚酰胺66树脂注塑润滑。它是为快速周期和***）
103HSL: Heat stabilized,lubricated polyamide 66 resin for injectionmolding（热稳定，聚酰胺66树脂注塑润滑）
151L: Lubricated, generalpurpose molding grade（润滑，通用品级）
158L: Lubricated, generalpurpose molding/extrusion grade -- a higher melt viscosity thanZytel® 151L NC010（润滑，通用注塑/挤出级-高熔体比Zytel®151L NC010粘度）
153HSL: Lubricated, heatstabilized, extrusion grade（润滑，热稳定，挤出级）
114HSL: heat stabilized,lubricated, modified polyamide 66 resin for injectionmolding.（热稳定，润滑，改性聚酰胺66树脂注塑）
132F: Nucleated, lubricatedpolyamide 66 for injection molding. It is suitable for fastproduction cycles and high productivityapplications（核，润滑尼龙66注塑成型。它适用于快速的生产周期和***应用的理想选择）
135F: Zytel® 135F is anucleated polyamide 66 resin for injection molding. It wasdeveloped for fast cycles and highproductivity.（Zytel®135F是一个有核的聚酰胺66树脂注塑。它是为快速周期和***）
145: Zytel® 145 BK010 is aweather resistant, high flow, fast cycling, modified polyamide 66resin with improved toughness.（Zytel® 145BK010是耐候性，高流动性，快速循环，聚酰胺66树脂改性，改善韧性。）
157HSL: Lubricated, heatstabilized, improved weather resistant molding/extrusiongrade（润滑，热稳定，tigao耐候成型/挤出级）
330: Transparent nylonresin(透明尼龙树脂)
42A: Zytel® 42A NC010 is a highviscosity polyamide 66 resin for injection molding and extrusion.(Zytel®42A是一种聚酰胺66树脂注塑成型和挤压高粘度)
450HSLX: Zytel® 450HSLX is aheat stabilized, lubricated, medium toughened polyamide 66 forinjection molding. It has high impact resistance at low temperatureand dry as molded.(Zytel®450HSLX是一种热稳定，润滑，中等增韧尼龙66注塑成型。它在低温高抗冲击性和干燥)
45HSB: High viscosity, heatstabilized polyamide 66 resin for injection molding and extrusionapplications such as film andtubing.(高粘度，热稳定尼龙注塑成型，如电线和管材挤出应用66树脂)
70G13: 13% Glass fiberreinforced polyamide 66 resin for injectionmolding（13％玻璃纤维增强聚酰胺66树脂注塑成型）
70G33: 33% Glass fiberreinforced polyamide 66 resin for injectionmolding（33％玻璃纤维增强聚酰胺66树脂注塑成型）
70G43: 43% Glass fiberreinforced polyamide 66 resin for injectionmolding（43％玻璃纤维增强聚酰胺66树脂注塑成型）
70G43L: 43% Glass fiberreinforced polyamide 66 resin for injectionmolding（43％玻璃纤维增强聚酰胺66树脂注塑成型）
70G13HS1L: 13% Glass fiberreinforced, heat stabilized, polyamide 66 resin for injectionmolding（13％玻璃纤维增强，热稳定，聚酰胺66树脂注塑成型）
70G13L:13% Glass fiberreinforced polyamide 66 resin for injectionmolding（13％玻璃纤维增强聚酰胺66树脂注塑成型）
70G25HSLR: 25% Glass fiberreinforced, heat stabilized, hydrolysis resistant polyamide 66resin for injectionmolding（25％玻璃纤维增强，热稳定，抗水解聚酰胺66树脂注塑成型）
70G30HSL: Zytel® 70G30HSL is a30% glass reinforced, heat stabilized, black nylon 66 resin forinjection molding.（Zytel ®70G30HSL是一个30％的玻璃纤维增强，热稳定，注塑成型的黑色尼龙66树脂）
70G30HSLR：30% Glass fiberreinforced, heat stabilized, hydrolysis resistant polyamide 66resin for injectionmolding（30％玻璃纤维增强，热稳定，抗水解聚酰胺66树脂注塑成型）
70G30HSR2：Zytel® 70G30HSR2 is a30% glass fiber reinforced, heat stabilized, hydrolysis resistant,black polyamide 66 resin for injectionmolding.（Zytel®70G30HSR2是一个30％的玻璃纤维增强，热稳定，抗水解，黑色尼龙66树脂注塑）
70G30L：30% Glass fiberreinforced polyamide 66 resin for injection molding.(30％玻璃纤维增强聚酰胺66树脂注塑)
70G33GRA：33% Glass fiberreinforced(33％玻璃纤维增强)
70G33HS1L：33% Glass fiberreinforced, heat stabilized polyamide 66 resin for injectionmolding(33％玻璃纤维增强，热稳定聚酰胺66树脂注塑成型)
70G33L：33% Glass fiberreinforced polyamide 66 resin for injectionmolding(33％玻璃纤维增强聚酰胺66树脂注塑成型)
70G35HSL：35% Glass fiberreinforced, heat stabilized polyamide 66 resin for injectionmolding(35％玻璃纤维增强，热稳定聚酰胺66树脂注塑成型)
70G35HSLRA4：35% Glass fiberreinforced, heat stabilized, hydrolysis resistant polyamide 66resin for injection molding. It has excellent flowcharacteristics.(35％玻璃纤维增强，热稳定，抗水解聚酰胺66树脂注塑。它具有优异的流动特性。)
70G35HSLX：Zytel® 70G35HSLX is a35% glass fiber reinforced, heat stabilized, black polyamide 66 forinjection molding.(Zytel®70G35HSLX是一个35％的玻璃纤维增强，热稳定，注塑成型黑色尼龙66)
70G43HSLA：43% Glass fiberreinforced, heat stabilized, black polyamide 66 resin for injectionmolding.( 43％玻璃纤维增强，热稳定，用于注射成型的黑色尼龙66树脂。)
70G43L：43% Glass fiberreinforced polyamide 66 resin for injectionmolding（43％玻璃纤维增强聚酰胺66树脂注塑成型）
70G50HSLA：50% Glass fiberreinforced, heat stabilized polyamide 66 resin for injectionmolding. It has excellent flowcharacteristics.（50％玻璃纤维增强，热稳定聚酰胺66树脂注塑。它具有优异的流动特性。）
70G60HSL：Zytel® 70G60HSL is a60% glass fiber reinforced, heat stabilized, lubricated polyamide66 for injectionmolding.（Zytel®70G60HSL为60％的玻璃纤维增强，热稳定，润滑尼龙66注塑成型）
70K20HSL：Aramid-modified, heatstabilized, lubricated PA66 resin with excellent wearresistance.（芳纶改性，热稳定，润滑尼龙66树脂具有优良的***性）
75CG30HSL：Zytel® 75CG30HSL is aglass-reinforced, toughened, heat stabilized polyamide resinmodified with carbon fiber for improved performance in structuralapplications.（Zytel®75CG30HSL是一种玻璃纤维增强，增韧，热稳定聚酰胺树脂结构与碳纤维改性应用的性能。）
75LG40HSL：Zytel® 75LG40HSL is a40% long glass reinforced, heat stabilized, lubricated polyamide 66resin for structuralapplications.（Zytel®75LG40HSL是40％长玻璃纤维增强，热稳定，聚酰胺66树脂润滑结构的应用）
75LG50L: Zytel® 75LG50L is a50% long glass reinforced, lubricated polyamide 66 resin forstructural applications.(Zytel®75LG50L是50％长玻璃纤维增强聚酰胺66树脂润滑结构的应用)
75LG50HSL: Zytel® 75LG50HSL isa 50% long glass reinforced, heat stabilized, lubricated polyamide66 resin for structuralapplications.（Zytel®75LG50HSL50％的长玻璃纤维增强，热稳定，聚酰胺66树脂润滑结构的应用）
75LG60HSL: Zytel® 75LG60HSL isa 60% long glass reinforced, heat stabilized, lubricated polyamide66 resin for structuralapplications.（Zytel®75LG60HSL为60％长玻璃纤维增强，热稳定，聚酰胺66树脂润滑结构的应用）
80G14A:14% Glass fiberreinforced, toughened, high flow polyamide 66 resin. It offersoutstanding performance in injection moldingapplications.（14％玻璃纤维增强，增韧，聚酰胺66树脂高流动性。它提供了注射成型应用的出色表现）
80G14AHS: 14% Glass fiberreinforced, toughened, high flow, heat stabilized polyamide 66resin. It offers outstanding performance in injection moldingapplications.（14％玻璃纤维增强，增韧，高liuliang，热稳定聚酰胺66树脂。它提供了注射成型应用的出色表现）
80G25HS: 25% Glass fiberreinforced, toughened, heat stabilized, black polyamide 66 resinfor injection molding（25％玻璃纤维增强，增韧，热稳定，黑色尼龙66树脂注塑成型）
80G33HS1L: 33% Glass fiberreinforced heat stabilized polyamide 66 resin with outstandingimpact resistance developed using DuPont® Super Toughtechnology（33％玻璃纤维增强热聚酰胺66树脂稳定***抗冲击性开发利用杜邦®***强韧技术）
80G33: 33% Glass fiberreinforced polyamide 66 resin with outstanding impact resistancedeveloped using DuPont® Super Toughtechnology（33％玻璃纤维增强聚酰胺66树脂具有***抗冲击性开发利用杜邦®***强韧技术）
80G33L: 33% Glass fiberreinforced polyamide 66 resin with outstanding impact resistancedeveloped using DuPont® Super Toughtechnology（33％玻璃纤维增强聚酰胺66树脂具有***抗冲击性开发利用杜邦®***强韧技术）
80G43L:
80G43HS1L: Zytel® 80G43HS1L isa 43% glass fiber reinforced, heat stabilized, black polyamide 66resin with superior impactresistance.（Zytel®80G43HS1L是43％的玻璃纤维增强，热稳定，具有***的抗冲击性黑色尼龙66树脂）
CFE8005HS: Zytel® CFE8005HS isa Super Tough, heat stabilized, black polyamide 66 resin offeringoutstanding melt strength for extrusion blow molding applications.(Zytel®CFE8005HS是一个***强韧，热稳定，黑色尼龙66树脂提供***的熔融挤出吹塑成型应用的实力)
E101L: Zytel® E101L is alubricated, black polyamide 66 resin for injection molding.( Zytel®E101L是润滑，黑色尼龙66树脂注塑成型)
E103HSL: Zytel® E103HSL BK080is a heat stabilized, lubricated, black polyamide 66 resin forinjection molding.( Zytel® E103HSL是一种热稳定，润滑，黑色尼龙66树脂注塑)
E51HSB: High molecular weight,heat stabilized polyamide 66 resin for injection molding andextrusion(分子量高，热稳定聚酰胺66树脂注塑成型和挤出)
EFE1068: Zytel® EFE1068 is alubricated polyamide 66 for injection molding. It has excellentflow characteristics and was developed for fast production cyclesand high productivity applications.( Zytel®EFE1068是润滑尼龙66注塑成型。它具有优异的流动特性，并快速的生产周期和高生产力的应用开发)
EFE8089B: Zytel® EFE8089B is a33% fiber reinforced, heat stabilized, lubricated, toughenedpolyamide 66 resin for injection molding.( Zytel®EFE8089B是33％，纤维增强，热稳定，润滑，聚酰胺66树脂注塑钢化玻璃)
FE3757: Zytel® FE3757is alubricated polyamide 66 resin modified for toughness, high flow andfast cycling in injection molding applications.( Zytel®FE3757是润滑聚酰胺66树脂韧性，高liuliang和应用的快速循环注塑修改)
FE5555: 35% Glass reinforcedblack polyamide 66 developed for encapsulationapplications(35％玻璃纤维增强尼龙66的黑色封装应用开发)
FN714: Very flexible, graftedionomer modified nylon 66 resin(非常灵活，嫁接离子改性尼龙66树脂)
FN718: Zytel® FN718 is aflexible, plasticizer free modified polyamide 66 resin having goodheat aging and chemical resistance. (Zytel®FN718是一种灵活的，自由的聚酰胺66增塑剂具有良好的耐热老化和耐化学性树脂改性)
FN727: Zytel® FN727 is animpact modified, plasticizer free, very flexible polyamide 6 alloyresin having good low temperature toughness, good heat aging andgood chemical include cable jacketing,hose and tube applications.(Zytel®FN727是影响改性，增塑剂自由，很灵活的尼龙6合金树脂具有良好的低温韧性，良好的耐热老化和良好的化学包括电缆护套，软管和管的应用)
FR7025V0F: Unreinforced, noelemental phosphorous and halogen free(非增强，无元素磷和卤素)
FR7026V0F: Unreinforced, noelemental phosphorous and halogen free flame retardantPA66(非增强，无元素磷和无卤阻燃尼龙66)
FR70M30V0: 30% Mineralreinforced, flame retardant polyamide 66 resin for injectionmolding(30％矿物增强，阻燃聚酰胺66树脂注塑成型)
ST801: Zytel® ST801 is anunreinforced, super tough polyamide 66 for injection molding andextrusion. It offers outstanding break resistance over a widetemperature and humidity range and high productivity.( Zytel®ST801是一种无筋，超韧尼龙注塑成型和挤出66。它可在很宽的温度和湿度范围和高生产率***打破阻力)
ST801HS: Zytel® ST801HS is aheat stabilized Super Tough nylon 66 resin. It offers outstandingimpact resistance and high productivity.( Zytel®ST801HS是稳定的超韧尼龙66树脂热。它提供了***抗冲击性和高生产率)
ST811:
ST801A: Super Tough, highperformance, polyamide 66 resin. It is partially UV stabilized andwhen appropriately colored offers limited protection to indirectsunlightexposure.(***强韧，高性能，聚酰胺66树脂。这是部分紫外线稳定和适当的颜色时，提供有限的保护，以间接阳光照射)
ST801AHS: Super Tough, highperformance polyamide 66 resin. It offers outstanding moldingperformance in injection moldingapplications.(***强韧，高性能聚酰胺66树脂。它提供了***成型注塑成型应用的性能)
ST801AW: Super Tough, highperformance polyamide 66 resin. It is UV stabilized and whenappropriately colored, offers the best resistance to indirectsunlight in automotive interiorapplications.(***强韧，高性能聚酰胺66树脂。它是紫外线稳定和适当的颜色时，提供了的抵抗在汽车内部应用间接的阳光)
WRF101A: Zytel® WRF101A is anunreinforced lubricated PA 66 resin modified for excellent flow andimproved wear and friction characteristics.( Zytel®WRF101A是一种无筋润滑尼龙66树脂良好的流动和改进磨损和摩擦特性修改)
WRF403: 30% Glass reinforced,heat stabilized PA66 resin containing Teflon® PTFEmicropowder(30％玻璃纤维增强，热稳定PA66树脂含有特富龙®聚四氟乙烯微粉)
WRF500: Zytel® WRF500 NC010 isa heat stabilized polyamide 66 resin modified with Teflon® PTFEMicropowder and Kevlar®. It is designed for superior wearresistance in applications re low wear and/or lowfriction(Zytel® WRF500NC010是热带Teflon®聚酰胺聚四氟乙烯微粉和Kevlar®66树脂改性稳定。它是专为需要***的***性低磨耗申请和/或低摩擦)
408HS：A new, improved heatstabilized modified nylon 66. HeatStabilized（一种新的，改进的热稳定改性尼龙66。热稳定）
408L:Zytel® 408L NC010 is ageneral purpose, lubricated, modified nylon 66 resin with superiortoughness.( Zytel®408L NC010是一种通用，润滑，改性尼龙66树脂具有***韧性)
42: Zytel® 42A NC010 is a highviscosity polyamide 66 resin for injection molding and extrusionapplications such as film and tubing.(Zytel®42A条NC010是尼龙66注塑和管材，如电线和高粘度树脂挤出应用。)
71G13: Contains 13% glassreinforcement. Impact modified(含有13％的玻璃纤维。冲击改性)
10B12T.
105BL-10A.
105BK-10A.
131L.
131LHS-L.
11C1-40.
20B.
20C,.
8018HS: Contains 14% glassreinforcement. Outstanding impact strength, heatstabilized.(含14％玻璃增强。***抗冲击强度，热稳定)
8018: Contains 14% glassreinforcement. Outstanding impactstrength(含14％玻璃增强。***抗冲击强度)
71G33L: Contains 33% glassreinforcement. Impact modified.(含有33％玻璃纤维加固。冲击改性)
71G13L: Contains 13% glassreinforcement. Impact modified.(含有13％的玻璃钢筋。冲击改性)
70G33HRL: Contains 33% glassreinforcement. High resistance to hot water andoxidation.(含有33％玻璃纤维加固。高抗热水和抗氧化)
美国杜邦PA66 FR50-NC010,阻燃级增强级尼龙FR50-NC010
产品参数
性能项目 试验条件[状态] 测试方法 测试数据数据单位
基本性能 吸水率 24hr ASTMD-570
DAM｜50%RH
1.2｜-
%
需氧指数 ASTM D-2863
DAM｜50%RH
15｜19
%
吸水率 饱和 ASTM D-570
DAM｜50%RH
6.7｜-
%
物理性能 比重 ASTM D-792
DAM｜50%RH
1.06｜1.06
机械性能 挠曲强度 ASTM D-790
DAM｜50%RH
1689｜862
MPa
剪切强度 ASTM D-732
DAM｜50%RH
57.9｜-
MPa
IZOD冲击强度 ASTM D-1822
DAM｜50%RH
588｜1155
KJ/m2
断裂伸长率 ASTM D-638
DAM｜50%RH
80｜210
%
拉伸强度 ASTN D-638
DAM｜50%RH
517｜41.4
MPa
IZOD冲击强度 ASTM D-256
DAM｜50%RH
907｜1068
J/m
硬度计硬度 ASTM D-676
DAM｜50%RH
6.7｜-
电气性能 介电常数 108Hz ASTMD-150
DAM｜50%RH
3.2｜4.5
损耗因数 106Hz ASTMD-150
DAM｜50%RH
0.02｜0.03
体积电阻率 ASTM D-257
DAM｜50%RH
1014｜1013
Ω.m
损耗因数 100Hz ASTMD-150
DAM｜50%RH
｜0.2
介电常数 106Hz ASTMD-150
DAM｜50%RH
2.9｜3.2
介电常数 1000Hz ASTMD-150
DAM｜50%RH
3.2｜5.5
损耗因数 108Hz ASTMD-150
DAM｜50%RH
｜0.1
热性能 UL燃烧性 UL 94
DAM｜50%RH
HB｜HB
热变形温度 0.5×106Pa
DAM｜50%RH
216｜-
℃
热变形温度 18×106Pa ASTMD-648
DAM｜50%RH
71｜-
℃
熔点 ASTM D-789
DAM｜50%RH
255｜255