IFN ANALOGINPUT

• 订货数据

•  

• 产品信息

跳转到

概述

优势

应用

设计

功能

技术规范

尺寸图

更多信息

概述

The IFN ANALOGINPUT (IFN AI) andIFN ANALOGINPUT-DISTANCE (IFN AI-D) are two robust interfacenodes for SIPLUS CSM4000:

• For provision of analog measured data for further processing incombination with the CMS X‑Tools software (X‑Tools must beordered separately, see "Analysis Software" →"CMS X‑Tools")

• The IFN AI has a measuring range of -10 V to+10 V and the IFN AI-D has an extended voltage range of-20 V to +20 V.

• Can be used for high-accuracy, continuous monitoring in harshenvironments

优势

• Thanks to the rugged design and IP67 degree of protection, theIFN ANALOGINPUT is suitable for use in rough industrialenvironments.

• The compact design permits applications in confined areas.

• Easy handling facilitates efficient commissioning andmaintenance.

应用

The IFN ANALOGINPUT is a robust interface node for SIPLUSCMS4000, designed for detecting voltages (-10 V to +10 V)in the frequency range from 0 Hz to 40 kHz.

The IFN ANALOGINPUT is used for high-accuracy, continuousmonitoring in harsh environments.

设计

The fronts of the IFN AI and IFN AI-D feature:

• LEDs for status display

• Six connections for analog inputs (-10 V to +10 V,-20 V to +20 V)

• Three connections for IEEE1394 bus system

• One connection for power supply

Connection to the higher-level evaluation PC is via an IEEE1394bus system operating at 400 Mbit/s.

The module can be mounted on an IEC rail or with mountingbrackets.

功能

The IFN ANALOGINPUT enables up to six analog signals(-10 V to +10 V) to be recorded.

The maximum sampling frequency is 192 kHz per channel.

技术规范

Article number6AT8000-1BB00-0XA06AT8000-1BB00-2XA0SIPLUS CMS4000Interface Node AISIPLUS CMS4000 Interface Node AI-DGeneralinformation  Product type designationIFN AIIFNAI-DProduct descriptionup to six analog input signals can bemeasured with the IFN AIup to six analog input signals can bemeasured with the IFN AI-D in the range of ±20 VInstallationtype/mounting  Mounting typestandard railMountingaccessoriesMounting bracket, can be ordered as optionRequiredclearance  ● for side-by-side mounting at thefront80 mm● for side-by-side mounting at thetop25 mm● for side-by-side mounting at theback25 mmSupply voltage  Design of the powersupplystabilizedRated value (DC)24 Vpermissible range, lowerlimit (DC)18 Vpermissible range, upper limit(DC)32 VReverse polarity protectionYesOvervoltageprotectionYes; max. 35 VInput current  from externalsupply (24 V DC), max.0.2 APower  Active powerinput, max.4.8 WAnalog inputs  Number of analoginputs6Designation of the analog inputCH1 ... CH6Electrical inputfrequency, min.0 HzElectrical input frequency,max.96 kHzOvervoltage strength, min.-60 VOvervoltagestrength, max.60 VOpen-circuit detectionYesShort-circuitdetectionNoInput ranges  ● VoltageYesInput ranges(rated values), voltages  ● At DC,min.-10 V-20 V● At DC, max.10 V20 VInputranges (rated values), currents  ● withDC0.012 mAAnalog value generation for theinputs  Parameterizable down sampling frequencies4 / 8 /16 / 24 / 48 / 64 / 96 kHzSampling frequency,max.192 kHzIntegration and conversion time/resolution perchannel  ● Resolution with overrange (bit includingsign), max.16 bitErrors/accuracies  Relativemeasuring accuracy for analog input signals,min.-0.5 %Relative measuring accuracy for analog inputsignals, max.0.5 %Crosstalk attenuation between analog inputsignals at 1 kHz-90 dBSignal-to-noise ratio for analog inputsignals-80 dBInterfaces  Number of interfaces3Designof plug-in connectionConnector plug 8-pole (M12)Transmission rate,max.400 Mbit/sProtocols  Bus protocol/transmissionprotocolIEEE 1394a/bPotential separation  Potentialseparation analog inputs  ● Potential separationanalog inputsYesDegree and class of protection  IP degreeof protectionIP67Standards, approvals,certificates  Certificate of suitabilityCECE markYesKCapprovalYesChina RoHS complianceYesUse in hazardousareas  ● ATEXYes● IECExYesAmbientconditions  Ambient temperature duringoperation  ● min.-40 °C● max.65 °CAmbienttemperature duringstorage/transportation  ● Storage,min.-40 °C● Storage, max.85 °C● Transportation,min.-40 °C● Transportation, max.85 °CConnectionmethod  Design of electrical connection for supplyvoltageMale connector 5-pole (M12)Design of electrical connectionat inputConnector plug 5-pole (M12)Design of electrical connectionfor the PE conductorM4 screw with contact washer● Connectableconductor cross-section for PEterminal2.5 mm²Mechanics/material  Material ofhousingaluminumDimensions  Width86 mmHeight210 mmDepth87 mmDepthwhen mounted on DIN rail96 mmWeights  Weight(without packaging)1.23 kg

尺寸图

IFN ANALOGINPUT