AC2300
PC/ABS | PC与ABS合金
台湾化纤
规格级别：耐热 电镀
产品用途：手机外壳，汽车零组件，安全帽，车灯底座，注射针筒外壳，电子类塑胶元件
备注说明：电镀级 超高耐冲击性，高耐热性，一般成型
AC2300 物性表
性能 额定值 单位 测试方法
抗张强度 (23℃) 500(49) Kg/㎡(MPa) ASTM D-638(ISO 527)
弯曲强度 (23℃) 800(79) Kg/㎡(MPa) ASTM D-790(ISO 178)
弯曲模数 (23℃) 26000(2550) Kg/㎡(MPa) ASTM D-790(ISO 178)
洛氏硬度 (23℃) R-110 R-Scale ASTM D-785(ISO 2039/2)
IZOD冲击强度 (23℃ 1/8″ 厚) 50(490) Kg-cm/cm(J/m) ASTM D-256(ISOR180)
热变形温度 (Unannealed 18.6kg/c㎡ ( 1/4″ 厚)) 92 ℃ ASTM D-648(ISO75/A)
维卡软化点 (1Kg load (9.8N)) 112 ℃ ASTM D-1525(ISO 306)
熔融指数 (240℃X5Kg (49N)) 9.0 g/10 min ASTM D-1238(ISO 1133)
比重 (23℃/23℃) 1.12 ASTM D-792(ISO 1183)
收缩率 (3.2mm) 0.4-0.6 % ASTM D-995
燃烧性 (FILE NO.E162823) 1/16″ HB ALL Color FILE NO.E162823UL-94
-
PC/ABS | PC and ABS alloy
Taiwan Chemical Fiber
Specification level: heat resistant electroplating
Product use: mobile phone shell, auto parts, safety helmet, lampbase, injection syringe shell, electronic plastic components
Remark: electroplating grade, ultra-high impact resistance, highheat resistance, general molding
AC2300 Physical Property Table
Performance rating unit test method
Tensile strength (23 ℃) 500 (49) Kg/㎡ (MPa) ASTM D-638 (ISO527)
Bending strength (23 ℃) 800 (79) Kg/㎡ (MPa) ASTM D-790 (ISO178)
Bending modulus (23 ℃) 26000 (2550) Kg/㎡ (MPa) ASTM D-790 (ISO178)
Rockwell hardness (23 ℃) R-110 R-Scale ASTM D-785 (ISO2039/2)
IZOD impact strength (23 ℃ 1/8 ″ thick) 50 (490) Kg-cm/cm (J/m)ASTM D-256 (ISO R180)
Hot deformation temperature (Unannealed 18.6kg/c ㎡ (1/4 ″thick)) 92 ℃ ASTM D-648 (ISO 75/A)
Vicat softening point (1Kg load (9.8N)) 112 ℃ ASTM D-1525 (ISO306)
Melt index (240 ℃ X5Kg (49N)) 9.0 g/10 min ASTM D-1238 (ISO1133)
Specific gravity (23 ℃/23 ℃) 1.12 ASTM D-792 (ISO 1183)
Shrinkage (3.2mm) 0.4-0.6% ASTM D-995
Flammability (FILE NO. E162823) 1/16 ″ HB ALL Color FILE NO.E162823 UL-94
