PC/ABS作为世界上销售量大的商业化聚合物合金，近几年都以10%左右的需求速度增长。PC/ABS较之PC提高了流动性，改善了加工性能，减少了制品对应力的敏感性，广泛应用于汽车内饰，外饰，车灯等高强度，高耐热零件。随着人们环保意识的提高，汽车行业ELV等环保可回收法规的相继出台，原材料厂商也不断提供新的解决方案。作为工程塑料行业适时的推出了新一代PC/ABS合金系列材料，它主要包括了耐水解稳定性的PC/ABS，用于免喷涂内饰的超低光泽PC/ABS，耐化学品优异不易被油漆等侵蚀的耐化学溶剂PC/ABS等系列产品。
本公司长期经营各种进囗塑胶原料：
1、通用塑料：ABS、PP、HDPE、LDPE、LLDPE、HIPS、GPPS、PVC、EVA等。
2、尼龙系列：PA6、PA66、PA11、PA12、PA46、PA6T、PA9T、透明尼龙、增强尼龙、阻燃尼龙、增强阻燃尼龙、超韧耐寒尼龙。
3、工程塑料：POM、PBT、PMMA、PC、PPO、PPA、PPS、PPE、PETG、PEEK、PET、PEI、ASA等。
4、特殊塑料：LCP、AES、PSF、PSU、PSO、EVOH、PC/ABS、PC/PBT、PC/PET、PA/ABS、PA/PPO、等。
5、热塑性弹性体：TPU、TPV、TPX、TPE、TPEE、TPR、SBR、SEBS、SM、K胶等。
6、塑胶原料有导电系列、抗静电系列、加铁氟龙系列、加铁氟龙加玻纤系列、加铁氟龙加碳纤系列、加碳纤系列、加纤防火系列等
As a commercial polymer alloy with large sales volume in theworld, PC/ABS has been growing at a demand rate of about 10% inrecent years. Compared with PC, PC/ABS improves the fluidity,improves the processing performance and reduces the sensitivity ofproducts to stress, so it is widely used in high strength and highheat resistant parts such as automobile interior, exteriordecoration and lamps. With the improvement of people's awareness ofenvironmental protection and the introduction of environmentalprotection and recyclable regulations such as ELV in the automobileindustry, the raw material manufacturers also continue to providenew solutions. As the engineering plastics industry, a newgeneration of PC/ABS alloy series materials was timely launched,which mainly includes PC/ABS with hydrolysis-resistant stability,ultra-low gloss PC/ABS for spray-free interior decoration, andchemical solvent-resistant PC/ABS with excellent chemicalresistance and not easy to be corroded by paint and otherproducts.
The company has long operated various imported plastic rawmaterials:
1. General plastics: ABS, PP, HDPE, LDPE, LLDPE, HIPS, GPPS,PVC, EVA, etc.
2. Nylon series: PA6, PA66, PA11, PA12, PA46, PA6T, PA9T,transparent nylon, reinforced nylon, flame-retardant nylon,reinforced flame-retardant nylon, ultra-tough and cold-resistantnylon.
3. Engineering plastics: POM, PBT, PMMA, PC, PPO, PPA, PPS, PPE,PETG, PEEK, PET, PEI, ASA, etc.
4. Special plastics: LCP, AES, PSF, PSU, PSO, EVOH, PC/ABS,PC/PBT, PC/PET, PA/ABS, PA/PPO, etc.
5. Thermoplastic elastomer: TPU, TPV, TPX, TPE, TPEE, TPR, SBR,SEBS, SM, K glue, etc.
6. Plastic raw materials include conductive series, anti-staticseries, Teflon series, Teflon and glass fiber series, Teflon andcarbon fiber series, carbon fiber series, fiber and fire preventionseries, etc
