西门子PLC模块广州授权一级代理商

西门子PLC模块广州授权一级代理商

The register control is made available based on the SIMOTION PrintStandard Add On TRC1000 application. Workshops are available forexperienced SIMOTION users.

The modular SIMOTION TRC1000 wedge mark sensor comprises the IDS-PNevaluation unit with intelligent measured value processing(1-channel as gray value) and specific accessories. It is directlyconnected to PROFINET IO with IRT via an integrated 2-port switchwhereby it is integrated in the line topology of the real-timePROFINET network of the machine. It can be adapted to theparticular measurement task or machine situation using theexpansion accessories.西门子PLC模块广州授权一级代理商
The DS sensor module, for example, expands the basic device toinclude a second fiber-optic cable connection for measuring on thereverse side, or measuring marks that are located transversely.Both modules are connected to 24 V DC using aprefabricated cable (available in two lengths), and a connectingcable (open at one end). The fiber-optic cable is equipped with anoptical system and can be plugged into the IDS-PN or the DS. Thecable is available in two lengths. The optical system is attachedto the machine and can be adjusted using the three-sectionfiber-optic mounting set and standard ITEM profile elements.Further, the optical power and measured value processing forspecial measurement tasks can be adjusted using the fiber-opticcalibration tool.西门子PLC模块广州授权一级代理商

Topology of the SIMOTION TRC1000 integrated register control

设计西门子PLC模块广州授权一级代理商

Display anddiagnostics

• 10 LEDs to display device operating states and errors – and forbasic communication diagnostics.

• 2 measuring sockets for diagnostics and to update the firmware.These are not required in operation and are reserved for the use ofexperienced development engineers.
  1 x M12[DIAG], 12-pole, A-coded (Binder No.: 99 0491 1212).
  Program/debug interface, 4-channel analog value output (2 x sensoranalog signal, 2 x analog monitor) and 2-channel digital output (2x sensor digital signal) for development engineers.
  1 x M8[RS232], 6-pole (Binder No.: 79 3465 52 06).
  RS232 command interface for development engineers, e.g. fordiagnostics and parameterizing the sensor and the analogsignals.西门子PLC模块广州授权一级代理商

Communication

• 2 x M12 [Ethernet 0 / Ethernet 1], 4-pole, D-coded,PROFINET IO with IRT.
  Integrated 2-port switch to configure a PROFINET line-typetopology, e.g. with additional sensors and the SIMOTION control. Inaddition to real-time data, acyclic data – such as signal trace andsensor parameterization – are also transferred via this interface.Matching M12 PROFINET prefabricated cables are available, or userscan assemble them themselves (see PROFINET).

I/O devices

• 1 x fiber-optic cable connection, 3-pole.
  Plug-in screw connection for the fiber-optic cable, which isavailable in 2 lengths.

• 1 x M8 [external sensor], 4-pole.
  To connect a DS sensor module for a second fiber-optic cable. Therequired prefabricated connecting cable is available in twolengths, as an accessory.

Power supply

• 1 x M8 [24V=], 3-pole.
  A prefabricated cable to connect the 24 V DC electronics powersupply is available as an accessory.

Additionalinterfaces

• 1 x M12 [Encoder], 8-pole, A-coded, encoder connection (BinderNo.: 99 1487 812 08).
  A TTL incremental encoder can be directly connected here (e.g. forfeedback signals from a side register actuator motor).

The SIMOTION TRC1000 accessory DS sensor module extends the IDS-PNto include a second, external fiber-optic cable connection formeasuring register marks at both sides and for two-webmeasurements, as well as for horizontal mark arrangements:

• 1 x fiber-optic cable connection, 3-pole.
  Plug-in screw connection for the fiber-optic cable, which isavailable in 2 lengths (see IDS-PN).

• 1 x M8 [IDS-PN], 4-pole.
  Connection to the IDS-PN basic unit using prefabricated cables.

集成西门子PLC模块广州授权一级代理商

SIMOTION TRC1000 mounting example with ITEM profiles

The mounting set shown for mounting to ITEM profile elements isused to attach the fiber-optic cables.

• Horizontal crossbar standard part, e.g.: ITEM profile 8, light,natural, 40 x 40 (0.0.026.33) or ditto 80 x 40 (0.0.026.34) withlength dependent on the machine (2)西门子PLC模块广州授权一级代理商

概述

SIMATIC IPC and HMI family 12-22 inch西门子PLC模块广州授权一级代理商

User-friendly visualization at a control station is a decisivefeature for a powerful and precise register control system that iseasy to set up. This is the interface between the operation of themachine and technology integrated in the drive system. Print taskscan be transferred to the control system using a powerful Panel PCin conjunction with a simple-to-operate visualization application.Using convenient touch panels, when setting up, print marks can beeffectively measured and printing cylinder positions adapted.Register errors are continually monitored during a print run anddeviations displayed. An application based on WinCC TIA isavailable for SIMATIC IPC Panel PCs. This application provides thebasic and essential functions for state-of-the-art registercontrol. As a result of the open program code, existing functionscan be adapted as required. It is also possible to implementadditional system-specific functions. We recommend 15" inch asthe minimum screen size for user-friendly operation at the mainpanel. Local panels that are only used to display oscilloscope datacan be smaller.

Orderinginformation:西门子PLC模块广州授权一级代理商

When using the standard application, approximately 512 power tagsare required to visualize the register control for a maximum of8 print units. We recommend that the application is adapted toaddress the particular system scope.

For local panels where only local control locations are displayed,the application can be reduced so that 128 power tags aresufficient. SIMATIC IPC and WinCC TIA Runtime can be ordered as abundle.

HMIaccessories (ordering data for IPCs and WinCC TIAAdvanced)

SIMATIC IPC277D TOUCH 6AV7881…

Runtimelicenses:西门子PLC模块广州授权一级代理商

WinCC Runtime Advanced 128 power tags 6AV2104-0BA03-0AA0

WinCC Runtime Advanced 512 power tags 6AV2104-0DA03-0AA0

WinCC Runtime Advanced 2048 power tags 6AV2104-0FA03-0AA0

WinCC Runtime Advanced 4096 power tags 6AV2104-0HA03-0AA0

WinCC Runtime Advanced 8192 power tags 6AV2104-0KA03-0AA0

西门子PLC模块广州授权一级代理商