产品名称：Jost TCE-Grease800
核心优势：
1.符合NSF食品规范
2.注塑制品表面不留黑印
3.模具3万模长周期润滑
附加优势：
1.耐温280°C
2.不留油迹在模具活动部位
3.可防止模具顶针出现磨损和卡住现象
4.德国进口，品制保证
产品说明：
成分：固态润滑脂。
功能：润滑模具活动部件，同时避免润滑油从模具顶针转移至成品表面。
主要应用：
1.注塑机模具的滑块和顶针润滑
2.280°C以内的高温润滑
3.普通零件的润滑以及热电偶/挤出模头的润滑等
典型性能：
颜色
白色
工作温度，°C
-30 – 280
VKA-Weld load:
>6000
NLGI， DIN51818
2
密度，g/cm³
1.91
闪点
不适用
包装：瓶装，200克每瓶，1公斤每罐
TCE – GREASE 800
Synthetic high-performance grease temperature stable up to280°C
PRODUCT DESCRIPTION
Long term lubrication of ejectors, molding forms, slidegate valves, column-guidance, spindles, pressure plates, rollerbearings, calanders, clamping frames….
· Highest number of shots withoutreapplication
· Thermally stable up to280°C
· High pressure lasting
· Steady against aggressivemedia
· Neutral against plastics, elastomers –chemical inert
· High affinity to metalsurface
· Minimum required
· No transfer to mouldedparts
· Silicone free
APPLICATION
First lubrication: Tool surface must be cleanbefore the use of TCE-GREASE 800 or any other grease mustbe removed. Only in use of cleansurfaces the product can bring the best results and a long-termlubrication is granted. For this procedure we recommend ourcleaner TCE-FLUID 010.
Putting on the grease should be evenly and economicallywith brush, fingers or similarly.
TCE-GREASE 800 is mot miscible with greases of differentbasic oils !
DATA
Colour:
white
Temperature range:
-30°C - +280°C
Worked penetration:
265 – 295
NLGI-class:
2
VKA-Weld load:
>6000
Flashpoint:
none
Density (20°C):
app. 1,91 g/cm³
Packaging:
200g dispenser, 250g can, 800g cartouche
我公司主要经营德国进口螺杆清洗剂，防锈剂，脱模剂，模具清洗剂，顶针油等差别化产品
我们的地址：广东省广州市番禺区大龙街东怡新区一街7号
电话：020-84649832
联系手机： 期待您的咨询