产品名称：Jost TCE-Grease 300
核心优势：
1.符合NSF食品规范
2.透明注塑制品表面不留黑印
3.模具3万模长周期润滑
附加优势：
1.耐温300°C
2.不留油迹在模具活动部位
3.可防止模具顶针出现磨损和卡住现象
4.德国进口，品质保证
产品说明：
成分：固态润滑脂。
功能：润滑模具活动部件，同时避免润滑油从模具顶针转移至成品表面。
主要应用：
1.注塑机模具的滑块和顶针润滑
2.300°C以内的高温润滑
3.普通零件的润滑以及热电偶/挤出模头的润滑等
典型性能：
颜色 | 白色，抹于顶针上后变为无色 |
润滑剂 | 合成剂，PFPE |
稠化剂 | 有机类 |
NLGI， DIN 51818 | 2 |
基础油粘度 (40°C) | 500mm²/s |
相溶性 | 与基它种类的基础油不相溶 |
包装：瓶装，200克每瓶，1公斤每罐
TCE –GREASE 300
High temperature – ejectorgrease up to +300°C (572°F) solid free – siliconefree
PRODUCTDESCRIPTION
TCE – GREASE300 is a chemicalinert and solid-free High-Tech-Grease.
The product is aspecial development for the long term lubrication of ejectors ininjection molding tools.
Because the product does notcontent particles it is suitable for very smalltolerances.
TCE – GREASE300 is resistantagainst acids, lyes, degassing and solvents.
The product is chemical neutraland does not affect plastics.
Small are enough for a long termlubrication and the strong bonding to the ejectors preventscontamination of the part.
PROPERTIES
· Temperature stable up to 300°C(572°F)
· No drop point
· NSF-H1 approved – suitable in the foodindustry
· No transfer to molded parts
· Highest number of shots withoutreapplication
· Resistant against degassing.
DATA
Colour: | white(colorless on the ejector) | ||
Base oil: | synthetic (PFPE) | ||
Thickener: | organic | ||
NLGI-class (DIN51818): | 2 | ||
Base oil viscosity(40°C): | 500mm²/s | ||
Miscibility: | theproduct is notmiscible withgreases made of other base oils | ||
Packaging: | 200 gdispenser & 1.000 g can | ||