劲霸发动机抗磨修复剂
品牌:UD优道
产品编号:UD-01.255
企业标准:Q/YK 014-2009
净含量:325ml
1.劲霸气缸压力调节剂
产品特点:
1. 增加缸压,恢复气缸压力,增快燃烧速率,保持油门顺畅,发动机易起动,动力足。
2. 提高燃油效率,降低有害气体排放,改善冷车启动困难,改善怠速不稳、耗油、及马力不足等现象。
3. 消除引擎爆震;防止发动机早燃,提升发动机功率,延长引擎寿命,使发动机更加安静。
使用方法:
使用前先将产品摇均匀,将本品全部加入汽油箱后再加满汽油,启动发动机后正常行驶,本品每瓶可加入40-80升燃油,根据需求可适当添加剂量。
注意事项:
本品对金属材料、三元催化器、氧传感器、橡胶制品及密封件等均无任何不良影响。未稀释时,本品属于易燃品,请远离火源储存!
工业用品,请远离儿童放置!
若不慎掉入眼睛,请立即用大量清水冲洗。
1. Pneumatic cylinder pressure regulator
Product features:
1. Increase the cylinder pressure, restore the cylinder pressure,increase the combustion rate, keep the throttle smooth, easy tostart the engine, and have sufficient power.
2. Improve fuel efficiency, reduce harmful gas emissions, improvestart-up difficulties of cold cars, and improve unstable idlespeed, fuel consumption, and insufficient horsepower, etc.
3. Eliminate engine knock; Prevent early combustion of engine,improve engine power, extend engine life, make engine morequiet.
Usage:
1. Preheat the engine to normal temperature and then close theengine;
2. Open the engine oil cap, and pour the stiffener compressionratio regulator into the engine oil to cover the oil cap;
3. Drive normally after starting the engine.
Notes:
This product has no adverse effect on metal materials, ternarycatalytic converters, oxygen sensors, rubber products and sealingparts. When not diluted, this product belongs to flammableproducts, please keep away from the source of fire storage!
Industrial supplies, please keep away from children!
If you fall into your eyes, rinse immediately with plenty ofwater.